cpu oc（CPU超频）.docVIP

cpu oc（CPU超频） BIOS： 高级芯片组功能选项里 系统性能（系统效能选项）：这个项目有四个选项分别为安全级（数学，进阶级（积极的） 性能级（涡轮）和专家级（专家）如果大家超频的话可以选专家级。（这个对超频有帮助。也只有选项了这 个选项才能看到主板里面的外频逐频调节：） CPU时钟比率（这个是倍频调节大家不用说也明白啦。我说说这块板的超频的关键的：） 前端总线频率（前端总线调节选项）这个选项是用来调节外频的，只有用户把系统效能选项调为 “专家级”才能看到逐M调节。现在大家不用说也明白了，前面打开那个Turbo选项的原因了吧：） CPU接口（CPU与前端总线参数设定项）这是用业协调与主频稳定的项目选项有optimei和CPU。 积极的二个没有超频的时候推荐使用数学超频的时候推荐使用咄咄逼人。 内存频率（内存频率选项）当用户把前面说的”系统效能”选项调为”专家级”（专家）这个选项 才会多出内存的具体频率选项。如果选择100%的话就是代表和内存同步运行其它的选项可以让内存CPU。 与CPU异步运行（内存设置得太高或者太低会让内存无法工作）。 fsbspread谱这个（前端总线展频开启了会对实际频率有所影响。）。 It is recommended to be switched off in overclocking mode Memory timings (memory clock options) overclocking, then it still shows four options, if your memory is brand name and quality If you want to overclocking, then choose expert (expert) (Im using kingmaxDDR400 memory) AGPspread spectrum (AGP frequency) in the overclocking state will make the system unstable, it is recommended to shut down AGPfrequency (AGP/PCI set) set it into standard FSB well, in order to overclock stability. Power BIOS features CPU, voltage, regulator (CPU voltage adjustment) voltage, the best not to tune more than the original 20%. (my CPU turned out to be 1.5V now In the super into two hundred. The FSB approached 2700+ to use 1.6V voltage). AGP voltage regulator (AGP voltage regulation), see do it yourself, DIMM voltage regulator (memory voltage adjustment), when the CPU overclocking may cause system instability, look at the situation can be raised a little DDR400 as an example. The initial voltage of 2.6V can be added to the 2.85 is safe. VDD volatage regulator (chipset voltage regulation) this project is what we commonly called the Beiqiao voltage regulator for NFORCE2 Chip 200 FSB is basically a stable. As to the CPU work in more than 200 words. It is possible to increase the voltage. The maximum can be transferred to 2.0V, generally we can transfer to 1.8V. The higher the voltage, the chip will increase the amount of heat, it is best in Beiqiao chip Add a fan or heat sink My own