fz文库（FZ Library）.docVIP

fz文库（FZ Library） FZ library.Txt How to encapsulate your system (Tutorial) 2009-12-14 13:36 First, run C:\SysPrep\SysPacker.exe and pop up. Please manually modify the IDE controller for the standard IDE controller. Click ok Go to the SysPacker.exe main interface again. Point left lower corner of device, out of device manager, change the computer power management mode, point computer in front of + number. In the ACPI Uniprocessor PC (specific for computer hardware varies, with the option) right click and select update driver out of the window to select from a list or a location to install the next step, the following dont search. Ill choose the driver I want to install, check the show compatible hardware and pull down to the bottom, and select Standard PC to complete. (prompt restart, select no) and then back to the device manager interface right click on the IDE ATA/ATAPI Intel controller (R) 82801BA Bus Master IDE Controller (the main board: different display will be different), select change driver in the pop-up hardware update wizard dialog box, select install from a list or specify the location (Senior) , click next , do not search in the choice, I will choose the driver to install, and then click next, select the standard dual channel PCI IDE controller , then click next . The hardware manager will automatically install the driver standard dual channel PCI IDE controller, then you will be prompted to restart the computer, Select no not start, complete OK. Turn off device manager. You have all options to automatically configured, (if do not use the 7z package to automatically release, in the system deployment program in the C:\SysPrep\Run.exe select delete. Error checking, no error. Then click on the package to come out of the dialog box, check no re creation of security identifiers.. Re packaging After completion. Go to C:\WINDOWS\system32\, find Dllcache, uncheck, restart automatically, and delete yourself. Point backup, quit, shutdown!! Start the PE system on