mhdd使用详解（MHDD usage detail）.docVIP

mhdd使用详解（MHDD usage detail） MHDD usage detail 1, MHDD is a Russian Maysoft company produced professional hard disk software has powerful function of many other hard disk tool software can not match, it is divided into the full version of the free version and fees, this paper introduces the detailed usage free version. 2, whether in CHS or MHDD in LBA mode, you can access to large capacity hard disk 128G (sector range from 512 to 137438953472 can be accessed), even if you use the 286 computer, without BIOS support, without any interruption of support; 3, MHDD is best run in pure DOS environment; 4, MHDD can not rely on the motherboard BIOS direct access to the IDE port, but be careful not to use the original Intel brand motherboard; 5, do not run MHDD on the hard disk you want to detect; 6 and MDD need to record data at runtime so that they cannot be run in a write protected storage device (such as write protected floppy disks, CDs, etc.); MHDD command detailed EXIT (hotkey Alt+X): quit to DOS. ID: hard disk detection, including hard disk capacity, head number, sector number, SN serial number, Firmware firmware version, LBA, DMA, numerical support level whether to support the HPA, support AAM, SMART level and switch mode switch state, state security...... Et al.). INIT: hard disk initialization, including Device, Reset (hard disk reset), Setting, Drive, Parameters (setting the hard disk parameters), Recalibrate (recalibration). I (hotkey F2): execute both the ID command and the INIT command. ERASE: quick delete function. Each delete unit is equal to 255 sectors (data recovery is invalid). AERASE: Advanced delete function, you can delete the data in the specified sector sector by Sector (slower than ERASE, data recovery is also invalid), each deletion unit is equal to 1 sectors. HPA: hard disk capacity cutting capabilities reduce the capacity of hard disks and reduce BIOS detection capabilities, but software such as DM, capable of detecting hard disk drives independen