复印机维护（Copier maintenance）.docVIP

复印机维护（Copier maintenance） Complete manual of laser printer maintenance Although the laser printer many models, but because of its working principle and the materials used are basically the same, but some specifications of different, therefore, for the general maintenance of the laser printer, basically are suitable for all kinds of laser printer, only some special difference. 1. wire maintenance due to residual toner in the printer Although the laser printer many models, but because of its working principle and the materials used are basically the same, but some specifications of different, therefore, for the general maintenance of the laser printer, basically are suitable for all kinds of laser printer, only some special difference. Maintenance of 1. electrode wire As the printer has residual toner, dust and paper scraps and other impurities, charging, transfer, separation and elimination of electrode wire will be contaminated, so that the voltage drop, and affect the normal performance. In general, if the charge transfer, wire electrode contamination waste powder, paper ash, printing ink to print out is not enough, even very weak, which is mainly due to the wire electrode on the dirt on the drum charging, so the voltage it produces in the latent image on the drum is not enough and absorbing low electrode transfer the wire is pollution and make the voltage is not enough, when the paper passed the paper and toner contact closely enough, and the transfer to the paper toner enough, it will make the output pattern color is too light. In addition, when the electrode (groove) of the transfer electrode is seriously polluted, the back of the output paper pattern is dirty, because the output of the pattern paper passes through the transfer electrode wire groove. And the pollution of the electrode will cause the paper to be separated and produce jam and other troubles, If the electrode is polluted, the residual toner on the toner cartridge will not be cleaned properly, which