基于CAN总线的智能家居控制(毕业设计).docVIP

编号： 毕业设计说明书 题目类型： 理论研究 实验研究 工程设计 工程技术研究 软件开发 2012年 月 日Visual Basic Abstract Since the beginning of the 21st century, with the development of computer and Internet technology, information appliances have been more and more in peoples life, along with advances in science and technology, the intelligent home is at an unprecedented rate into the homes of ordinary people at home. Small size, wide range of applications, the use of flexible, cheap, reliable and advantages of microcontroller as the core, combined with computer composed of smart home products. The design is based on the CAN bus smart home control systems, to study the hardware circuit design, software programming, and CAN bus application in the field of smart home. The control system up from a structural division can be divided into two levels, respectively, for each node of the PC monitoring and machine control. PC monitoring of monitoring computer PC, CAN-RS232 bus protocol converter, the next crew of data acquisition module of the microcontroller and the CAN bus intelligent node to complete the real-time monitoring of the state of the environment of the home. System designs two CAN bus node, using temperature sensor DS18B20, humidity sensor DHT11, smog sensor MQ-2, BIS0001 infrared sensor, to detect circuitly indoor temperature and humidity, fire Pirates of the situation and other environmental information. Recording and monitoring of the data sent to the PC, the PC machine can check the records and history, the host computer and the CAN nodes are equipped with an alarm function, alarm upper and lower limits can be set through the button and the CAN-RS232 protocol conversion. The system hardware consists of the master chip STC89C52RC，CAN bus communication module, serial communications interface circuits, smoke concentration detection module, infrared detection module of human motion, temperature and humidity detection circuit, LCD circuits, etc.. System software design, includi