【2017年整理】多传感器联合检测技术在XLPE电缆附件局部放电定位中的试验研究.pdfVIP

第39 卷 第20 期 电力系统保护与控制 Vol.39 No.20 2011 年10 月16 日 Power System Protection and Control Oct. 16, 2011 多传感器联合检测技术在 XLPE 电缆附件局部放电定位中的 试验研究 郑文栋，杨 宁，钱 勇，黄成军，江秀臣 （电力传输与功率变换控制教育部重点实验室，上海交通大学电气工程系，上海 200240） 摘要：介绍了目前常用于 XLPE 电缆局部放电检测中的高频电流法、超高频法和声发射法检测原理，并在此基础上提出了多 传感联合检测技术用于XLPE电缆附件局部放电定位的方法。通过在XLPE电缆中人工模拟局部放电信号的方式，进行了多传 感器的联合定位试验。试验研究结果表明，多传感器联合检测技术在 XLPE 电缆附件的局部放电检测和定位中具有很好的有 效性和实用性。多传感器的联合应用可以有效地排除现场干扰，提高局部放电检测与定位结果的可靠性。 关键词：XLPE电缆；局部放电；定位；高频电流；超高频；声发射 Experimental research on partial discharge localization in XLPE cable accessories using multi sensor joint detection technology ZHENG Wen-dong ，YANG Ning ，QIAN Yong，HUANG Cheng-jun ，JIANG Xiu-chen （Key Laboratory of Control of Power Transmission and Transformation ，Ministry of Education, Department of Electrical Engineering ，Shanghai Jiao Tong University，Shanghai 200240，China ） Abstract ：The theories of the high frequency current transformer （ HFCT ）method ，ultra-high frequency （ UHF ） method and acoustic emission （ AE ） method applied to partial discharge （ PD ） testing for XLPE cable under normal operation are presented ，and based on which a multi-sensor joint detection technology is proposed. A muti-sensor joint detection experimental research is done using artificial defect signal in XLPE cable. The experimental results show the effectiveness and practicality of this technology in the partial discharge detection and location of XLPE cable accessories. PD localization based on multi sensor joint detection technology can reduce interference signals from the field and make the PD localization result more reliable ． Key words ：XLPE cable; partial discharge; localization; HFCT; UHF; AE