储罐制作指导书.docVIP

CSPC NANHAI PETROCHEMICALS PROJECT CSPC 南 海 石 化 项 目 FABRICATION AND ERECTION OF TANK WORK INSTRUCTION 储罐制作及安装作业指导书 WORKING INSTRUCTION：WI-8710-8100-2006 SEPCO Electrical Power Construction Corporation 山东电力基本建设总公司 REV DATE REASON FOR ISSUE BY CHK’D REVIEW APPR A 22 JUL 2003 Issue for Review and approval WF LHJ CHY DPS 00 24 AUG 2003 Issue for implementation WF LHJ CHY DPS 01 12 SEP 2003 Issue for implementation WF LHJ CHY DPS 02 2 NOV 2003 Issue for implementation WF GHM ZX SDP Revision Information 修改记录 Rev 版次 Section No. 章节号 BSF review record No. BSF审查单序号 Description of main changes 主要修改内容 02 5 Sections g 2 Add “DEP 30.46.00.31-CSPC THERMAL INSULATION (AMENDMENT/SUPPLEMENTS TO THE CINI MANUAL “INSULATION FOR INDUSTRIES”)” 增加“DEP 30.46.00.31-SCPC保温（CINI手册“工业保温”校正/增补版）“ Attachment B 3 Add” SEPCO2 QUALITY SYSTEM ORGANIZATION CHART FOR FABRICATION AND ERECTION OF TANK” 增加了“SEPCO2 储罐制作与安装的质量管理组织结构” 3.1 4 Sepco’s working scope don’t conflict with sepco2’s; Because we adopt three grade checking before acceptance Sepco’s工作范围与Sepco2’s不冲突，因为我们采用的是三级验收。 5 5 Add safety , welding survey procedures, issued by SEPCO 增加了SEPCO安全、焊接和焊接程序 Attachment C 6 Add” LAYOUT JOBSITE OF STORAGE TANK?” 增加了“储罐施工现场布置图” 9.3.7 7 Add” cleaning oil , grease and contaminant on the plate surface with fresh water before blasting.” 增加了“在抛丸前用清水清洁钢板表面的油，油脂及污染物。” 9.3.8 8 Add” Surface cleanness and surface profile should be relatively inspected with photo in the GB8923” rustiness and antirust grade of steel plate surface before blasting” 增加了“表面清洁度和轮廓根据GB8923《涂装前钢材表面腐蚀等级和除锈等级》所规定的图片进行对照观察检查” 9 The DFT is complied with DEP required system!!! The paint system number is 15 in the latest revisions of the coating the DEP and the SP, but storage tank’s system number is 1. 2 10 Delete” and antisepsis” 删除了“and antisepsis” Attachment D 11 12 13 14 15 1 6 Add ”JSA” 10.2.10 10.3.23 10.4.17 Add” Welding detail see 12 section.” 增加了“焊接细节见12节” 10.2.7 Add “Only welders qu