第3单元CCC实施规则-热熔断体english.docVIP

File No.: CNCA—01C—007：2001 IMPLEMENTION RULES FOR COMPULSORY CERTIFICATION OF ELECTRICAL AND ELECTRONIC PRODUCTS Switches for Circuit, Installation Protective and Connection Devices Thermal-links Announced on Dec.7, 2001 Implemented on May 1, 2002 Certification and Accreditation Administration of People’s Republic of China CONTENTS 1. Scope 3 2. Certification model 3 3. Major processes of certification 4 3.1 Application for certification 4 3.2 Type testing 4 3.3 Initial inspection of the factory 4 3.4 Evaluation of certification results and approval of certification 4 3.5 Follow-up inspection 4 4. General requirements for certification 4 4.1Application for certification 4 4.2 Type testing 5 4.3 Initial inspection of the factory 6 4.4 Evaluation of certification results and approval of certification 7 4.5 Follow-up inspection 8 5. Certificate 10 5.1 The maintenance of the certificates 10 5.2 Extension of certified products 10 5.3 The suspension, cancellation and withdrawal of the certificates 11 6. Use of the marks for compulsory products certification 11 6.1 Design of the mark allowed to use 11 6.2 Derivations of certification mark 11 6.3 Ways of use 11 6.4 Location of the mark 11 7. Charge 12 Appendix 1 13 Appendix 2 14 IMPLEMENTION RULES FOR COMPULSOEY CERTIFICATION OF ELECTRICIAL AND ELECTRONIC PRODUCTS Switches for Circuits, Installation Protective and Connection Devices Thermal-links 1. Scope This document applies to thermal-links, intended for incorporation in electrical appliances, electronic equipment and component parts thereof, normally intended for use indoors, in order to protect them against excessive temperatures under abnormal conditions. This document may be applicable to thermal-links for use under other than indoor conditions, provided that the climatic and other circumstances in the immediate surroundings of such thermal-links are comparable with those in this program. T