opto-electric cellular biosensor using optically transparent indium tin oxide (ito) electrodesopto-electric细胞生物传感器使用光氧化铟锡(ito)透明电极.pdf

Sensors 2008, 8, 3257-3270; DOI: 10.3390/s8053257 OPEN ACCESS sensors ISSN 1424-8220 /sensors Article Opto-Electric Cellular Biosensor Using Optically Transparent Indium Tin Oxide (ITO) Electrodes 1 1 2 1 Chang K. Choi , Chuck H. Margraves , Seung I. Jun , Anthony E. English , Philip D. Rack 2 and Kenneth D. Kihm 1,* 1 The University of Tennessee, Dept. of Mechanical, Aerospace, and Biomedical Engineering, Knoxville, TN 37996 USA; Chang K. Choi, Presently at Oak Ridge National Laboratory, Bioscience Division, Oak Ridge, TN 37831 USA 2 The University of Tennessee, Dept. of Material Science and Engineering, Knoxville, TN 37996 USA; Seung I. Jun, Presently at dpiX, LLC, Process Engineering Group, Colorado Springs, CO 80916 USA * Author to whom correspondence should be addressed; E-mail: kkihm@ Received: 29 January 2008 / Accepted: 16 May 2008 / Published: 19 May 2008 Abstract: Indium tin oxide (ITO) biosensors are used to perform simultaneous optical and electrical measurements in order to examine the dynamic cellular attachment, spreading, and proliferation of endothelial cells (ECs) as well as cytotoxic effects when exposed to cytochalasin D. A detailed description of the fabrication of these sensors is provided and their superior optical characteristics are qualitatively shown using four different microscopic images. Differential interference contrast