performance evaluation of multi-channel wireless mesh networks with embedded systems绩效评估与嵌入式系统多通道无线网状网络.pdf

Sensors 2012, 12, 500-517; doi:10.3390/s120100500 OPEN ACCESS sensors ISSN 1424-8220 /journal/sensors Article Performance Evaluation of Multi-Channel Wireless Mesh Networks with Embedded Systems Jun Huy Lam, Sang-Gon Lee * and Whye Kit Tan Department of Ubiquitous IT, Division of Computer Information Engineering, Dongseo University, Busan, 617-716, Korea; E-Mails: timljh@ (J.H.L.); blueppp@ (W.K.T.) * Author to whom correspondence should be addressed; E-Mail: nok60@gdsu.dongseo.ac.kr; Tel.: +82-51-320-1760; Fax: +82-51-327-8955. Received: 15 December 2011; in revised form: 2 January 2012 / Accepted: 2 January 2012 / Published: 5 January 2012 Abstract: Many commercial wireless mesh network (WMN) products are available in the marketplace with their own proprietary standards, but interoperability among the different vendors is not possible. Open source communities have their own WMN implementation in accordance with the IEEE 802.11s draft standard, Linux open80211s project and FreeBSD WMN implementation. While some studies have focused on the test bed of WMNs based on the open80211s project, none are based on the FreeBSD. In this paper, we built an embedded system using the FreeBSD WMN implementation that utilizes two channels and evaluated its performance. This implementation allows the legacy system to connect to the WMN independent of the type of platform and distributes the load between the two non-overlapping channels. One channel is used for the backhaul connection and th