储罐水压试验方案_附件.doc

文件类型 Document type 文件页数 Pages 版次 Version 修订说明 Revision note 受控编号 Controlled number GH 1版 Version 首次 1st 储罐充水试压方案 Tank Hydro-test Plan 2 2012年1月日 . 1, 2012 版次Edition 日期 Date 编制Formulated by 审核 Reviewed by 批准 Approved by 中国化学工程第十三建设有限公司 The 13th Construction Co., Ltd. of CNCE 储罐充水试压方案Tank Hydro-test Plan 目录Contents 一 适用范围Range of Application 二 编制依据Formulation Basis 三 工程概况General 四 施工工序Construction Procedure 3 五 施工步骤及方法Construction Procedure and Method 4 5.1 检查内容Check the contents： 4 5.2 准备工作Preparatory work： 4 5.3 充水试验应符合下列规定 5.4 水压试验示意图Hydro-test Diagram 6 5.5 充水过程检查Inspection for Water Filling Process 7 5.6 充水试验方法Hydro-test method 8 5.7 基础沉降观测Foundation Settlement Observation 10 5.8 放水检查 12 5.9 试压技术要求 13 六 质量管理Quality Management 3 6.1 质量保证体系Quality Guarantee Measures： 3 6.2 质量保证措施Quality Guarantee Measures： 4 七 质量管理Quality Management 5 7.1 安全保证体系Safety assurance system： 5 7.2 安全保证措施计划Planning for safety assurance measures： 6 八 人力计划VII. Planning for Labor Forces 九 机具准备 VII. Preparations of Machines and Tools 十 工作危险源分析评估及预防Work-related Hazard Analysis Evaluation and Prevention 一．适用范围Range of Application 1.本方案适用于塞拉尼斯（南京）乙酰基中间体有限公司工业乙醇项目八期改造扩建罐区4台储罐的充水试验的施工。This plan is applicable to the execution of the hydro-test for 4 tanks in the modification and expansion of the tank farm of Celanese China Fast Project. 二．编制依据Formulation Basis 1) 《钢制焊接常压容器》Steel Welded Atmospheric Pressure Vessels JB/T4735-1997 《立式圆筒形钢制焊接油罐施工及验收规范》Code for Construction and Acceptance of Welded Steel Oil Tank of Vertical Barrel Shape GB50128-2005 《石油化工钢储罐地基与基础施工及验收规范》Specification for Construction and Acceptance of Steel Storage Tank Subgrade Foundation in Petrochemical Industry SH3528-93 《大型焊接低压储罐设计与建造》Design and Construction of Large, Welded, Low-pressure Storage Tanks API620-2009 塞拉尼斯技术要求及相关过程规定Celanese technical requirements and relate