slip-flow and heat transfer of a non-newtonian nanofluid in a microtube滑流和非牛顿传热nanofluid超小型电子管.pdfVIP

Slip-Flow and Heat Transfer of a Non-Newtonian Nanofluid in a Microtube Jun Niu, Ceji Fu*, Wenchang Tan* State Key Laboratory for Turbulence and Complex Systems, College of Engineering, Peking University, Beijing, China Abstract The slip-flow and heat transfer of a non-Newtonian nanofluid in a microtube is theoretically studied. The power-law rheology is adopted to describe the non-Newtonian characteristics of the flow, in which the fluid consistency coefficient and the flow behavior index depend on the nanoparticle volume fraction. The velocity profile, volumetric flow rate and local Nusselt number are calculated for different values of nanoparticle volume fraction and slip length. The results show that the influence of nanoparticle volume fraction on the flow of the nanofluid depends on the pressure gradient, which is quite different from that of the Newtonian nanofluid. Increase of the nanoparticle volume fraction has the effect to impede the flow at a small pressure gradient, but it changes to facilitate the flow when the pressure gradient is large enough. This remarkable phenomenon is observed when the tube radius shrinks to micrometer scale. On the other hand, we find that increase of the slip length always results in larger flow rate of the nanofluid. Furthermore, the heat transfer rate of the nanofluid in the microtube can be enhanced due to the non-Newtonian rheology and slip boundary effects. The thermally fully developed heat transfer rate under constant wall temperature and constant heat flux boundary conditions is also compared. Citation: Niu J, Fu C, Tan W (2012) Slip-Flow and Heat Transfer of a Non-Newtonian Nanofluid in a Microtube. PLoS ONE 7(5): e37274. doi:10.1371/ journal.pone.0037274 Editor: Markus J. Buehler, Massachusetts Institute of Technology, United States of Americ