认识贴片电容（Understanding SMD capacitors）.docVIP

认识贴片电容（Understanding SMD capacitors） Understanding SMD capacitors The capacitance capacity units are: PF (F), micro - (UF), and PI (PI). Generally we dont use unit because its too big. The conversion relationship between units is: 1F=106uf??? 1uf=106pf? 1F=103mf=106uf=109nf=1012pf In use, also often see unit: nf. 1uf=1000nf???? 1nf=1000pf? Methods the capacity of identification: if the value is 104, capacity: 10X10000pf=0.1uf. If the value is 473, 47X1000pf=0.047uf. (how many times do the 4 and 3 in the back mean 10?). Another example: 332=33X100pf=3300pf. ? What is the advantage of the patch type of capacitors? Save space for high integrated circuit design The reliability and accuracy are higher, and the anti-interference ability is enhanced Safer, with no feet Two. What is the function of chip capacitors? The main function is to eliminate the crosstalk caused by various high-frequency signals produced by the chip itself to other chips, so that each chip module can work without interference. In the high frequency electronic oscillation circuit, the patch type capacitor and the crystal oscillator and other components constitute an oscillating circuit, providing the required clock frequency for various circuits. Chip capacitors include SMD ceramic capacitors, SMD tantalum capacitors, and SMD electrolytic capacitors. SMD ceramic capacitor non-polar, capacity is very small (class PF), generally can withstand very high temperature and voltage, often used in high frequency filtering. The ceramic capacitor looks a bit like a patch resistor (so sometimes we call it SMD capacitor), but there is no capacity size on the chip capacitor. SMD tantalum capacitor is characterized by long life, high temperature resistance, high accuracy, high frequency filtering, wave performance is excellent, but the capacity is smaller, the price is more expensive than the aluminum capacitor, and the ability to withstand voltage and current is relatively weak. It is used in low capacity low frequ