新型横向磁通永磁电机三维磁路分析-中国电机工程学报.PDFVIP

第30 卷 第33 期 中 国 电 机 工 程 学 报 Vol.30 No.33 Nov.25, 2010 90 2010 年11 月25 日 Proceedings of the CSEE ©2010 Chin.Soc.for Elec.Eng. 文章编号：0258-8013 (2010) 33-0090-06 中图分类号：TM 351 文献标志码：A 学科分类号：470·40 新型横向磁通永磁电机三维磁路分析 吴迪，辜承林 (华中科技大学电气与电子工程学院，湖北省 武汉市 430074) 3D Magnetic Circuit Analysis of a Novel Transverse Flux Permanent Magnet Machine WU Di, GU Chenglin (College of Electrical and Electronic Engineering, Huazhong University of Science and Technology, Wuhan 430074, Hubei Province, China) ABSTRACT: This paper applied the theory of magnetic flux TFPMM 磁路结构为三维，拓扑形式极为丰富， tube to calculate the flux leakage reluctance of a novel type of 这一方面为设计提供了广阔的空间，但也使得基于 transverse flux permanent magnet machine (TFPMM) stator 平面磁路的传统电机设计手段不再适用。为求得 core. Then, a new method to calculate space reluctance of TFPMM 实际磁场分布，多数文献采用有限元分析进 permanent magnet on rotor was presented according to the 行计算，而完全采用磁路分析的很少[1] 。与有限元 features of the nonferromagnetic materials of rotor. With these methods applied, the magnetic circuit models for the 分析相比，磁路分析方法较为粗略，不便于定量研 open-circuit magnetic field and armature reaction magnetic 究TFPMM 的参数和磁场分布，但其简易实用，且 field of TFPMM were established. Finally, the models were 通过简化模型计算所得参数与实际情况相差不大， compared with 3D FEA in calculating core flux using multiple 因此磁路分析方法仍具有应用价值。 sets of parameters, and a prototype was tested for validation. 分析磁路计算的误差可知，永磁电机等效气隙 All the results show that the models are reliable. 大，边缘效应造成的漏磁不能忽略，T