点阵式打印机的断针原因及预防方法(Causes and prevention of broken needle in dot matrix printer).doc

点阵式打印机的断针原因及预防方法(Causes and prevention of broken needle in dot matrix printer).doc

  1. 1、本文档共7页,可阅读全部内容。
  2. 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
  3. 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  4. 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
点阵式打印机的断针原因及预防方法(Causes and prevention of broken needle in dot matrix printer)

点阵式打印机的断针原因及预防方法(Causes and prevention of broken needle in dot matrix printer) Causes and prevention of broken needle in dot matrix printer Heilongjiang Zhao Qianlv 1994-01-28 First, the corrosion of the printing needle The root cause of the printers broken needle is that the print needle is corroded (rusted). After one or two years of use, most of the printing needles are corroded at 3 and 4 millimeters from the head. There is a black oil stain on the print needle. It can not be wiped with nails. This may be where the print needle is rusted. It can be seen clearly at five times more than the magnifying glass. Some pins break during loading and unloading, and some pins break in the brush. Who is caused by print needle is the corrosion of the culprit? According to the analysis: one is the color ribbon is alkaline or acidic juice, or the water is excessive, cause contact ribbon needle is caused by corrosion; the two is some comrades using non alcohol or other cleaning agent for cleaning the print head, a cleaning agent to cause corrosion to stay in print needle. Therefore, the measures to prevent needle breakage are mainly to prevent the damage to the printing needle from corrosion (corrosion), and to take corresponding measures. The fundamental measure is to prevent the etchant from sticking to the surface of the print needle and to nip it in the bud. Special recommendations are as follows: In the print head, guide plate between the paraffin should be protected. After cleaning with detergent or natural waste, wax should be added and filled in time. - use printer to long-term disabled, should go to the print needle add precision instrument oil (sewing machine oil can be used in the printer;), should also be used to print needle plus instrument oil. The above two measures not only reduce the adhesion of the metal etchant on the surface of the printing needle, but also increase the flexibility of the movement of the stylus. - to use high quality color ribbon and ribbon

您可能关注的文档

文档评论(0)

f8r9t5c + 关注
实名认证
内容提供者

该用户很懒,什么也没介绍

版权声明书
用户编号:8000054077000003

1亿VIP精品文档

相关文档