煤矿新工人培训（Coal mine new worker training）.doc

煤矿新工人培训（Coal mine new worker training） Coal mine new worker training test paper answer First, fill in the blanks (1 points per minute, 40 points) The 1 minute, the coal mine safety production is safety first, prevention, comprehensive treatment. 2, the mine has five natural disasters: flood, fire, gas explosion, coal dust explosion, roof accidents 3, one three prevention refers to ventilation, prevention and control of gas, dust prevention, fire prevention and so on 4, coal mine safety regulations stipulates that the mining face air temperature shall not exceed 26 degrees, the temperature of the electromechanical room is not more than 30 degrees centigrade. 5, coal seam occurrence three elements: strike, tendency, dip angle 6, the mine development methods include vertical shaft development, inclined shaft development, adit development and comprehensive exploitation of the four categories. 7, coal mine safety regulations provides that the mining face inlet air concentration of not less than 20%. 8. The top and bottom of coal seam can be classified into pseudo roof, direct roof and old roof according to the horizon In 9, the mine electromechanical three special refers to a special transformer, special switch, special line, two lock wind power and gas power interlocking lock. 10. The three protections mentioned in the electrical protection for coal mine are leakage protection, overcurrent protection and ground protection. 11, according to the direction of coal seam dislocation on both sides of the fracture surface, faults are divided into three types: normal faults, reverse faults and translational faults. 12, the hole depth is 0.6~1m, sealed the length of blasthole depth shall not be less than 1/2. The hole depth is more than 1m, stemming length not less than 0.5m. 13, treatment of misfire and residual blasting work must be carried out in the construction team leader personally under the guidance from the bootleg 0.3m, another hit with new holes in parallel, deep eyes