玻璃仪器使用错误分析（Error analysis of glassware）.doc

玻璃仪器使用错误分析（Error analysis of glassware） Error analysis of glassware First, glassware washing errors 1. the cleaning of glassware is the first step in the inspection work. In practical work, many people often neglect to clean the glassware or clean the instruments before and after the test. So that the internal walls of the apparatus are seriously hung with water droplets, dirt, precipitation, dry, adhesion on the inner wall, etc., can not be cleaned, and directly affect the accuracy of the data. 2., the general quality inspection of many varieties, miscellaneous items, it is impossible to test each indicator fixed, the use of a dedicated instrument, often alternate use, and the use of instruments without strict cleaning or cleaning test. It is inevitable to cause alternate contamination between reagents. Thereby affecting the accuracy of the inspection results. 3., on the other hand, the capacity measuring tools and the non measuring tools, the nature and washing methods are mixed together, all use decontamination, painting, washing, resulting in the capacity of measuring tools inaccurate, affecting the accuracy of the results of the measurement. Two. Heating errors in glass containers 1. heating process is a common step in physical and chemical analysis. In practical work, some people tend to ignore or fail to know which instruments can be heated and even make mistakes. The glass container is not a matter of fact can be directly heated, such as cylinder, measuring cups, bottles, bottle capacity can not be directly heated. Beaker, flask, triangle bottle and other reaction vessel should be chosen as appropriate. In actual work, if these basic knowledge is not clear, there will be errors, and even cause inspection accidents. 2. do not put the container on the asbestos net when heating the glass container, The container is directly placed in the electric furnace so that the container is unevenly heated and even burst. 3. the use of the process, the temperature change i