电调设定简法（Setting method of electrical regulation）.docVIP

电调设定简法（Setting method of electrical regulation） First, functional description 1, automatic recognition of the throttle point; 2 、 brake automatic adjustment; 3, you can set the parameters of 7: angle, battery protection, voltage threshold, power, midpoint, running mode, back force, static drag power; 5, support single direction and two-way operation. In the single direction operation, the positive throttle can cause the motor to move from zero speed to the highest speed, and the throttle reverse brake can not operate in reverse direction. There are two kinds of two-way operation: two-way braking and direct reverse operation. Bidirectional belt brake, throttle forward can make the motor from zero speed to the high speed running, and running forward, throttle switch to reverse the motor brake, until it stops, the throttle is not return zero (back to the site), hold the brake, throttle to zero after 0.5S, the motor can reverse reverse, reverse operation any time to push the throttle forward operation, the motor will run forward. The direct and reverse operation provides a brake, and when the throttle returns to zero, there is no need to wait, and then the reverse throttle is immediately reversed. Two, parameter setting instructions 1, parameter description: There are 7 parameters that can be set, and these 7 parameters are: You into the corner; The battery protection power threshold: in accordance with the unified treatment of lithium battery, battery type does not increase the additional parameters; The dynamic minimum throttle starting motor, maximum limit starting accelerator automatically by software; The midpoint range: used to adjust the throttle idle stroke length, wider range, the greater the throttle air travel; The operation mode: one-way and two-way belt brake, reverse operation is direct selection; The back force for two-way operation when reversing maximum astern speed limit; The static traction for stationary belt brake force can be set, minimum is 0. 2,