用户界面测试（User interface test）.doc

用户界面测试（User interface test） The interface between an application and a user is typically in the form of an interface, and the user interface is typically made up of the form and its internal controls. Therefore, the interface test mainly from the form and form of the control of two aspects to consider. The following details will give the form and control test ideas, hoping to give the reader a direction in the interface testing. A general form by the title bar, menu bar, toolbar, status bar and internal control component, so the form of the test mainly includes the test form and form itself in the title bar, menu bar, toolbar, status bar and internal control test. 1, form testing 1) the size of the form. The size of the form should be appropriate, so that the layout of the internal control is reasonable, not too dense, nor too open. 2) the location of the form. For the main form, the middle should correspond to the center of the display; for the child form, it should be in the middle of the display area of the parent form. 3) mobile forms. Move the form quickly or slowly, and the background and form itself must be refreshed correctly. 4) zoom form. Drag the mouse For a fixed size form, drag the mouse without resizing it. For a form that can drag and zoom with the mouse, the contents should be adjusted accordingly when the form is enlarged or reduced. Click the maximize button. The form is maximized, and the size or location of the internal controls should be adjusted accordingly. Click the restore button. You should revert to the default size of the form. Click the minimize button. For the main form, minimize to the lower left corner of the system status bar and arrange in order; for child forms in the form, minimize to the lower left corner of the parent container and arrange in sequence. 5) display resolution. Typically, the display resolution of a computer includes 800 * 600, 1024 * 768, 1280 * 1024, and so on. [note] because the programmers in programming, may u