珠宝摄影攻略（Jewelry photography）.doc

珠宝摄影攻略（Jewelry photography） The key to a good picture of a jewel is sharpening, lighting and exposure. If its jewelry, straight The light source will help. One General digital cameras use some common focus modes. This means that the camera will eat more For wide scenes, The focus falls on this wide scene. If you want to control the situation The focus of the machine, when shooting jewelry, it is best to adjust the camera Spot focus point The model, so that can be more Add precise control over the focus of the camera. However, stay Spot focus point Use auto focus in the mode, Many digital cameras dont really focus locking In a small, sparkling bead Treasure up. So, if you want to feature close-up for your jewelry, your cameras manual focus function is required Very good. Two Using a three tripod is the key to getting clear images. Use three tripods while shooting jewelry Similar camera support frames are necessary. Three Another key to getting high quality jewelry pictures is light. Usually, the soft light is right Jewelry is the best choice. Maybe youll find it with a built-in flash camera The pictures are not of very good quality. Not just because of the built-in flash, too light, And it could be The position of the flash is incorrect. The built-in flash will have a rough projection. We should adopt Continuous light EZstudio Photographic lamp, etc. . Polish the jewels, The best softboxes, You cant shadow it, Avoid large areas of high light, There is only one place where high light is needed The point is very eye-catching, or you can use a starlight mirror. The background is good if it is concise MM Wear, Lighting is very complex, MM The light and the performance of the jewels are separated by light, Adjust the racket carefully Take an angle and a light angle; place jewelry that needs to be displayed in a striking position. Accurate exposure is also critical. Jewelry photography requires not only the equipment but also the technology, The originality of photog