红木打蜡技术的步骤（Steps of waxing mahogany）.doc

红木打蜡技术的步骤（Steps of waxing mahogany） Steps of waxing mahogany [wood processing] First, waxing As we all know, mahogany furniture surface treatment in two ways: painting and waxing. The palace made furniture surface treatment mainly use waxing process. The waxing process keeps the woods own wood as well as beautiful grain. Waxing can not only retain the unique luster, feel and natural charm of annatto, but also effectively prevent moisture, corrosion, crack prevention and so on. In the use of the process, mahogany furniture itself will continue to appear from the inside out anti oil phenomenon, which has excellent maintenance of furniture. 1, wax is divided into open wax and closed waxing Waxing is wood wood will open eyes (needle), wood exposed, good wood materials, high technology products generally use open waxing, in order to display the handicraft class. Waxing is the wood wood closed eyes (needle) pores filled, to enhance the sense of smooth, generally with lacquer, lacquer for environmental protection non-toxic and tasteless. When filling the pores, use beeswax to wax. First, use high temperature to melt the wax into the wood, and then use the electric heater to bake the wax into the wood. Finally, wipe it with soft cotton cloth and cotton yarn, and remove the excess wax. 2, five requirements: color, gloss, smoothness, plumpness, clarity (1) color: play up the wax is transparent, wood surface wax is thin without grinding, but good waterproof, wood is not easy to crack, sealing function and so on wood materials are higher, the general requirements of uniform color. (2): unlike the paint gloss wax requirements is very bright, because the light by wax decision, but the product after careful polishing and polishing of wax still has excellent gloss, but customers generally do not pursue this effect. (3) smoothness: carefully polished, show the effect is caused by the sand thickness and polishing the thorough degree of the decision by 180# 240#, sandpaper - 320# - 4