高压制冷设计说明书.docVIP

重庆科技学院 毕业设计（论文） 题 目 学 院 机械与动力工程学院 专业班级 学生姓名 学号 指导教师 职称 评阅教师 职称 副教授 2014年月日学生毕业设计（论文）原创性声明本人以信誉声明：所呈交的毕业设计（论文）是在导师的指导下进行的设计（研究）工作及取得的成果，设计（论文）中引用他（她）人的文献、数据、图件、资料均已明确标注出，论文中的结论和结果为本人独立完成，不包含他人成果及为获得重庆科技学院或其它教育机构的学位或证书而使用其材料。与我一同工作的同志对本设计（研究）所做的任何贡献均已在论文中作了明确的说明并表示了谢意。 毕业设计（论文）作者（签字）： 年 月 日ABSTRACT With the HCFs refrigerants phasing abolished, and the high price of the new refrigerant, therefore the air was proposed as the refrigerant again. Using air as the refrigerant has many advantages that other refrigeration do not have. For example, it is completely environmentally friendly, and inexhaustible. In the refrigeration cycle, the air only plays the role of energy transfer. Whether its chemical composition or physical phase does not change (always in gaseous state), which is obviously distinguished from the other working fluid as a refrigerant in refrigeration cycle. The design process of the evaporator and condenser is mainly described in this paper. For economy and efficiency considerations, tube-fin heat exchanger is used in both evaporator and condenser. In the refrigeration cycle, the cooling capacity of 2500W, evaporator refrigerant inlet temperature of -3.15 ℃, outlet temperature is 12 ℃; compressor refrigerant outlet temperature is 50 ℃, the evaporator refrigerant outlet temperature is 40℃; refrigeration coefficient is 0.33,and the heat sophistication is 0.37.In this paper ，the structure size of the evaporator and condenser is designed, and its strength is checked. As can be seen by calculating, using air as the cooling of refrigeration efficiency is much lower than that of traditional cooling methods. How to improve the efficiency of air refrigeration cycle have become the main difficulties of the current study. Keywords: Air condens