本地连接受限制或无连接,本地连接显黄色叹号,无法上网排查思路（The local connection is restricted or no connection, the local connection show yellow exclamation mark, can not access the investigation thinking）.doc

本地连接受限制或无连接,本地连接显黄色叹号,无法上网排查思路（The local connection is restricted or no connection, the local connection show yellow exclamation mark, can not access the investigation thinking） The local connection is restricted or no connection, the local connection show yellow exclamation mark, can not access the investigation thinking There are no two cases of this situation: software and hardware. Software, xp-sp2 system, routing software settings, the hardware method is the network cable, network card, routing equipment. The following collection of online investigation methods summary: Windows XP SP2 more safety is considered, your IP is set to automatic acquisition, is to obtain IP and related parameters from the DHCP server, but this process may not complete. For some reason, in the SP1 era, in this case, in order to prevent the removal of network operating system (Microsoft wrote), by setting IP retention 169.x.x.x card, indicating any errors, if there are multiple computers do not get the correct IP, so they can communicate with each other through the reserved address. However, after installing SP2, the operating system, based on the principle of security first, does not assign any IP, disconnect network connections, and report errors. Local connections are restricted or connectionless.. The general situation is not bound by IP card, sometimes repair can be solved, but a lot of the time the repair is not effective, the reasons are very complex, usually caused by the network, and Never mind system or the computer itself, now lists the investigation method: Method 1: Open the control panel - network connection, find the local connection, right click it and choose properties in the general tab, double-click the Internet protocol (TCP/IP), select use the following IP address, in the IP address fill in 192. 168.0.1, in the subnet mask, fill in 255.255.255.0, and other do not fill in, and then click OK to solve the problem. (if the current computer joins a workgroup or a domain,