核桃剪枝方法（Pruning method of walnut）.docVIP

核桃剪枝方法（Pruning method of walnut） 1 different trees: tree, walnut tree, different cultivation conditions, should adopt different tree. Under the condition of close planting, the species with strong growth potential and erect tree stand, such as Xiang Ling, Liao 4 and Lu Guang, adopt free spindle shape. The tree is high and 0.6m, is arranged on the screw from the bottom up every 30 cm, a branch, tree height of about 4m, the distribution of about 10 branches, branch angle of about 70 degrees, than the apple bough angle is small, the direct distribution of the branch group. This big tree, the site, is conducive to the early high yield, strong wind resistance. Shaping method is: height 80~90 cm stem after planting, 4~8 full shoot under the cut, the dry year can sprout around 5 new shoots, 5~6 month cut the first shoots as the central leadership branch, selected uniformdistribution vigorous growth of branches as collateral. Second years to extend the central branch left 60 cm short section, the other left main 40-50 cm and cutting short branch, angle of 60 degrees. When the central extension of branch length to 60 cm, 50 cm or so left branching promoting the topping, and keep the good point of view as the main branch, autumn branch angle to 70 degrees. The 3-4 central stem and branch pruning with second years, the remaining branches if compaction should be thinning to fourth years; this tree high reached 4 meters, the central stem distribution around 10 branches, forming the basic. Yuanfeng, windy dry due to poor tree spreading, with a delay in happy, dry high 60 cm, 5-6 main distribution of the trunk, then falls head happy, the central stem height of 2 meters, 3 meters high tree. The tree formed early and had good illumination. The shaping method: stem height 80 cm, cut the branches for the leadership of the Central Committee Wang stem, the central stem fixed with bamboo, let the upright growth, 2-3 branches other elected uniformdistribution vigorous growth of the branch