洗衣粉的配方（Detergent formula）.docVIP

洗衣粉的配方（Detergent formula） I. performance of raw materials 1, alkylphenol ether (Tx 10): white, viscous liquid, is the production of high-grade, whitening washing powder and a surfactant, content of 99%, mainly the effect of foam, also can remove oily dirt, depending on the amount of foam. Quality identification methods: look at the color should be white or light yellow; mainly depends on the concentration and foam concentration. Buyers, stick a little bit with your fingers, and move back and forth several times in the water to see if there is more foam. Compared with the washing powder foam, the former is 10 times as much as the latter. 2, lauric acid two ethanolamine (6501): pale yellow, viscous liquid, is the production of various ordinary washing powder of a surfactant, content 98%. Mainly foam, foam stability is good, while the removal of oily dirt, foam depends on the amount of use. Quality identification method is the same as 1. 3, twelve alkyl benzene sulfonic acid: thick yellow, partial black, viscous liquid, is the production of a variety of ordinary washing powder of a surfactant, content of 98%, mainly foam, at the same time play the role of expansion, but also in addition to oil. The size of the laundry detergent and the amount of foam depend on the amount used. But we must pay attention to the content of 98%, the content of 40% - 60% not puffing, less foam, washing powder production of high humidity. Quality identification method with the 1. characteristics: heat on the palm of the hand. 4, sodium tripolyphosphate: white fine particles, content 90%, slightly poisonous. Mainly determine the storage time of washing powder, prevent washing powder knot. Increasing the dosage can prolong the storage time of the washing powder and increase the decomposition oil pollution. 5, soda: anhydrous sodium carbonate, white powder, containing 75%95%, The main decontamination in the laundry detergent. Generally used industrial soda ash, this product is easy to absorb mo