TM3MeshingparametersACTRAN tM 声学网格划分标准理论.pdfVIP

Meshingg Parameters for Nacelle Apppplications ACTRAN Trainingg – TM Copyright Free Field Technologies Introduction  Pre-reqquisites - before ggoingg througgh this ppresentation, the reader should have read and understood the following presentations:  ACTRAN General Organization  Theory ACTRAN Acoustic Simulation  Theory Convected Wave Propagation  The objective of the present document is to provide guidelines to build an efficient finite element mesh for the acoustic radiation of the inlet a nacelle  Key parameters are:  The position of the Modal Duct Finite/infinite CComponentt element  The location of the finite/infinite modal duct interface component element interface Flow  The local mesh refinement imposed by the presence of the flow 2 Copyright Free Field Technologies Location of the Modal Duct Compponent  A modal duct component is an analytical representation of a semi infinite duct that is used to generate duct acoustic modes  The section (in this example an annular section with inner radius=0.2m and outer radius=1m), the flow (in this example, 172.8 m/s) and the frequency (in this example 750 Hz) are important parameters for the mode propagation  The position of the Modal Duct is also crucial for the quality of the model