桥梁工程课件 第2篇第1至2章A 梁式桥与板式桥设计.pptVIP

Part 2 RC PC beam bridge第二篇 钢筋混凝土和预应力混凝土梁式桥 1.1 Classification 类型的划分 Development on the structure 结构体系的演变 1.1 Classification 类型的划分 Evolution of the section 截面形式的演变 1.1 Simple-supported structure 简支体系 1.1. Simple-supported structure 简支体系 1.1. Simple-supported structure 简支体系 1.2 cantilever beam system 悬臂体系 1.2 Cantilever beam system 悬臂体系 1.2 Cantilever beam system 悬臂体系 1.2 Cantilever beam system 悬臂体系 1.2 Cantilever beam system 悬臂体系 1.2 Cantilever beam system 悬臂体系 1.2 Cantilever beam system悬臂体系 1.3 Continuous beam system 连续体系 1.3 Continuous beam system 连续体系 2.1 form of the simple-supported slab bridge 简支板桥的构造 2.1.1 Cast-in-site slab bridge 整体式板桥 2.1.1 Cast-in-site slab bridge 整体式板桥 2.1.2 Construction of the prefabricated slab 装配式板桥的构造 2.1.2 Construction of the prefabricated slab装配式板桥的构造 2.1.2 Construction of the prefabricated slab装配式板桥的构造 2.1.1 Static characteristic of the skew bridge斜交板桥的受力特点 2.1.1 Static characteristic of the skew bridge 斜交板桥的受力特点 2.1.2 Construction features of the skew slab斜交板桥的构造特点 2.1.2 Construction features of the skew slab斜交板桥的构造特点 3.1 Construct characteristic of the simple-supported and fabricated RC beam bridge 装配式简支梁桥的构造特点 3.1 Construct characteristic of the simple-supported and fabricated RC beam bridge 装配式简支梁桥的构造特点 3.1 Construct characteristic of the simple-supported and fabricated RC beam bridge 装配式简支梁桥的构造特点 3.1 Construct characteristic of the simple-supported and fabricated RC beam bridge 装配式简支梁桥的构造特点 3.1 Construct characteristic of the simple-supported and fabricated RC beam bridge 装配式简支梁桥的构造特点 3.1 Construct characteristic of the simple-supported and fabricated RC beam bridge 装配式简支梁桥的构造特点 3.1 Construct characteristic of the simple-supported and fabricated RC beam bridge 装配式简支梁桥的构造特点 3.2.1 构造布置 3.2.1 构造布置 3.2.2 截面尺寸的拟定 3.2.2 截面尺寸的拟定 3.2.3 钢筋构造 3.2.4 装配式主梁的连接构造 3.2.4 装配式主梁的连接构造 3.3.1 构造布置 3.3.2 截面尺寸拟定 3.3.2 截面尺寸拟定 3.3.2 截面尺寸拟定 3.3.2 截面尺寸拟定 3.3.2 截面尺寸拟定 3.3.2 截