路博润添加剂介绍ADDCO CP-NF.pdf

ADDCO™ CP-NF-12 Magnesium Stain Inhibitor Introduction August 2011 © The Lubrizol Corporation 2011. All rights reserved. Outline • Market drivers • Performance challenges • Stain mechanisms • ADDCO™ CP-NF-12 – Features – Formulation and performance – Benefits 2 © The Lubrizol Corporation 2011. All rights reserved. Market Drivers Continued Demand for lighter weight components with high strength • Magnesium alloys offer 20-25% weight reduction over aluminum alloys • Estimated 20% growth of magnesium alloys in the automotive sector • Many uses: automotive, aerospace, power generation, IT components Awareness of health and safety issues while machining magnesium • Mg (s) + 2 H O (l) Mg(OH) (aq) + H (l) 2 2 2 • Hydrogen is flammable and asphyxiate • Neutral conditions = slow reaction Improved part quality and finish • Staining • Lubrication of aluminum with high pH for synthetic metalworking fluids 3 © The Lubrizol Corporation 2011. All rights reserved. Performance Challenges • Freshly machined magnesium surfaces can develop dark surface stain in presence of alkalinity: pH 9 • Metalworking fluids are typically alkaline – To prevent ferrous corrosion: chips, tooling, tanks, etc. – To help hinder microbial growth • Standard metalworking fluids have limited hard water tolerance 4 © The Lubrizol Corporation 2011. All rights reserved. Magnesium Staining Literature is limited: – Like aluminum, magnesium forms a similar oxide barrier; however of poorer quality so not as protective