ANSYS ACP Tutorial ex1复合材料分析官方实例1.pdf

ANSYS Composite PrepPost 15.0 Tutorial Exercise 1 1 © 2013 ANSYS, Inc. ANSYS, Inc. Proprietary ACP Tutorial Goals: • Basic composite workflow from a geometry to post-processing. • Build a simple sandwich panel. Load case: Clamped panel under uniform pressure. 2 © 2013 ANSYS, Inc. ANSYS, Inc. Proprietary ACP Tutorial • Open a new Workbench project and restore the archive “tutorial_1.wbpz”. • Review the boundary conditions, and verify that the model is well- defined with the default material. Review the results with an isotropic material. 3 © 2013 ANSYS, Inc. ANSYS, Inc. Proprietary ACP Tutorial • Add the ACP (Pre) component to the existing analysis. 4 © 2013 ANSYS, Inc. ANSYS, Inc. Proprietary ACP Tutorial First composite materials have to be defined in ANSYS Workbench Engineering Data: There are two possibilities: 1. Import preconfigured materials from the Composite Materials catalog (see figure below) 2. Create new materials In this example, you will create new materials as shown in the following slides. 5 © 2013 ANSYS, Inc. ANSYS, Inc. Proprietary ACP Tutorial Define a unidirectional material in ANSYS Workbench Engineering Data with the following properties: 6 © 2013 ANSYS, Inc.