伊泰集团李家梁煤矿400万t新井设计 采矿工程专业毕业论文 毕业设计.docVIP

摘 要本设计包括三个部分：一般部分、专题部分和翻译部分。 一般部分为0万t新井设计共10章：1.矿区概述及井田地质特征2.井田境界和储量3.矿井工作制度设计生产能力服务年限4.井田开拓5.准备方式-巷道布置6.采煤方法7.井下运输8.矿井提升9.矿井通风与安全技术10.矿井技术经济指标。位于井田走向（）长约，倾向（）长约，井田面积为2。主采煤层号煤，倾角，m。井田工业储量为万t，可采储量万t矿井服务年限为a。井田地质条件简单，煤层稳定矿井正常涌水量为m3/h，最大涌水量为m3/h；煤层硬度系数f=2.3，煤质为低中灰、低硫、特低磷～低磷、高热值不粘煤；矿井绝对瓦斯涌出量为0.63 m3/min，属低瓦斯矿井；煤层有自燃发火倾向，发火期40~60天，煤层具有强爆炸危险性。 矿井采用斜井-平硐单水平联合开拓方式，前期采用中央并列式通风，后期采用两翼对角式通风。一矿一面，采煤方法为厚煤层大采高综采全部垮落法。煤炭运输，辅助运输采用无轨胶轮车。 矿井年工作日为30 d，工作制度“三八”制（班生产，一班检修），每日班出煤。专题部分题目是。采用UDEC3.0。翻译部分ABSTRACT Keywords： This design includes of three parts: the general part, special subject part and translated part. The general part is a new design of Lijialiang mine. Lijialiang mine lines in south of eerduosi in NeiMenggu province. The traffic of road and railway is very convenience to the mine. The run of the minefield is 12.14km ,the width is about 4.47 km，well farmland total area is㎞2.The is the main coal seam, and its dip angle is 1 degree. The thickness of the mine is about 5.50m in all. The proved reserves of the minefield are 433.04 million tons. The recoverable reserves are 315.95 million tons. The designed productive capacity is 4 million tons percent year, and the service life of the mine is 60.80 years. The normal flow of the mine is 30 m3 percent hour and the max flow of the mine is 60 m3 percent hour. It is bituminous coal with low mine gas emission rate and coal spontaneous combustion tendency, and it’s a coal seam liable to dust explosion. The well farmland is a single level in an inclined well to expand. The working system “three-eight” is used in the Lijialiang mine. It produced 330d/a. This design includes ten chapters: 1.An outline of the mine field geology; 2.Boundary and the reserves of mine; 3.The service life and working system of mine; 4.development engineering of coalfield; 5.The layout of panels; 6. The method used in coal mining; 7. Transportation of the underground; 8.The lifting of the mine; 9. The ventilation and the safety operation of the mine; 10.The