洛克林接头在空调安装中运用.pptVIP

AIR CONDITIONER FOR SERVER ROOM CONNECTION TO THE INSTALLATION INSTALLATION OF THE TUBES FINISHED INSTALLATION Y-TUBES FOR MULTISPLITTING DEVICES Y-TUBES FOR MULTISPLITTING DEVICES Energielabel INSTALLATION OF AN AIR CONDITIONER Energielabel DAIKIN 30 kw AIR CONDITIONER Energielabel JOB PLANNING Energielabel ROOF REALISATION Energielabel FLARE CONNECTION LR-EURO-16 M When the LOKRING was brougth into a stress-free position connect the tube with the LR- Euro-XX. Use stabilisation inserts. Energielabel FINISHED OUTSIDE APPARATUS Found the finished assembled tube, to avoid damages caused by mechanical stress. Energielabel PRE-ASSEMBLY OF THE INSIDE APPARATUS Pre-assembly of the flare fitting and the 28,6 NWK Ms 50 for length adaption of the following installation. Energielabel NOTE: Check if the tube which has to be connected is seated untill the middle fixing point. Energielabel CONNECTION TO THE INSTALLATION Energielabel FINISHED INSIDE APPARATUS Take care of a stress-free position of the tubes. Energielabel Prepare parts of the installation, to ease the assembly in constricted places. Energielabel It is useful to make the last connection in areas with long tubes to avoid, mechanical stresses like twisting or bending. Energielabel Structure of an inverter: As you can see on the picture, several inside devices are conducted over one outsided unit. To connect the, in a series used evaporators, the y-tubes are needed. Energielabel Scheme of possible applications of y-tubes