网页显示不完整（The web page is incomplete）.doc

网页显示不完整（The web page is incomplete） Reinstall the system, I do not know is poisoning, or set up the problem, the web page shows incomplete!! As input: shows only one item above, none of which is displayed. One is that the flash plug-in is not new enough, and then uninstall, reinstall a new flash plug-in, or still can not display. I use TT, think it is set problems, enter the TT settings page, found that the settings page is also unable to display, can not be set Later, QQ space prompted the following information: Your browser cannot run the script properly. This may be related to your browser being modified by other software. You can try to fix it as follows: 1. click windowss start menu, and select run; 2. enter Regsvr32 jscript.dll (excluding double quotes) in the input box, and click ok; 3. click windows again on the start menu, and select run; 4. enter Regsvr32 vbscript.dll (excluding double quotes) in the input box, and click ok; According to the above steps, as expected, the problem is solved!! Thats strange!! It turned out that some space was not registered!! There are a lot of Regsvr32 command, see after see examples of repair system fault Regsvr32 command used ActiveX people know that ActiveX is not able to be registered system identification and use of the general setup will automatically put it by using the ActiveX control register, but if you need to get a control how to do the manual registration? If you modify the registry, it will be too much trouble, in the windows folder system, there is a regsvr32.exe program, it is Windowss own ActiveX registration and anti registration tools. The regsvr32.exe of the 2000 system is under the winntsystem32 folder; The regsvr32.exe of the WInXP system is under the WINDOWSSYSTEM32 folder The use of Regsvr32 is: Regsvr32, [/s], [/n], [/i ([CmdLine]]] dllname. Where dllname is the ActiveX control file name, it is recommended to copy to the system folder before installation. The parameters have the following meanings: