西西软件园（West West Software Park）.doc

西西软件园（West West Software Park） 44. chicken pecking meters, automatic pendulum Click! Click! The two hens, swinging rhythmically, stood on the shelf The shaking is picking in turns. Here is the picture Forty-four The condition of the toys activity. Double chicken peck Rice Automatic pendulum, use the weight of gravity to drive the handle rotation, shake the handle and then toggle the pendulum rod Back swing, make the swing rod in helping the two hens back and forth to zhuomi. 1. materials used Three ply; length of wire of the root; a grease box; a piece of lead or other heavy objects; String one. 2. making method Make wooden frame: Saw two pieces long One hundred Mm, wide Fifty-five Mm three plywood for front and rear plate. Saw two pieces long Forty-five Mm wide Fifty-five The three mm plywood is left and right. In front plate and back In the middle of the plate, two diameters are drilled Two A pinhole of millimeters. Pay attention to the alignment of the front and rear panels. Above The small hole is used as the shaft hole of the swing rod, and the small hole below is used as the shaft hole of the rocking handle. Use two blocks of white glue on the side panel Stick to the rear on both sides, and reinforced with small nails. The front panel is temporarily out of order. Make the swing bar: find a long wire and bend it into a swing bar. A short end is sheathed with a washer, By welding the tin, and then penetrates into the hole on the back plate. The long end is also fitted with a washer, and then Penetrate into the upper hole of the front panel. Glue the front panel to the two side panels with white glue and nail it with a small nail Prison. The washer is welded on the back of the front plate. The two washers on the pendulum shaft limit the action The direction of movement of a pendulum shaft. Then bend the wire outside the front panel into a guide slot. Its about the length Two hundred A wire made of millimeters. A grease box is welded at the end of the swing bar to