规范栽树（Specification for planting trees）.docVIP

规范栽树（Specification for planting trees） Planting specification Author: Editor: 2005-1-21 source: Tianyuan community Meng leaves Page function [Im two words] [font: large, medium, small] [Print] [off] 1. tree species selection KgrA All plant species should be selected according to local ecological and climatic conditions.@Q 2. description of plant material specification +c3) r (1) the tree height, crown width, crown thickness and size are not included in the leggy branches, leggy branches cut off, the size shall prevail. srX (2) the height of trees (natural, tall, slightly tall, tall, Miao Gao) means the height from the top of the pruning head to the ground. :, (3) crown width (crown width, Shu Kuan) refers to the average value of the horizontal dimension of the crown. V4L (4) trunk diameter (1.2 meters in diameter, diameter of stem) means the average diameter of the trunk 1.2 meters away from the ground (in particular case, the other is not in this case), and the dry, dry or branch trees are calculated by the area of the section. 5[JC (5) crown thickness (Shu Guanhou) refers to the size of crown thickness. 8Gy (6) mulch ball (ball, old territory soil column) refers to the plant root soil ball around the average diameter before and after transplantation. #KjEd/ 3. plant material inspection standard. (zV Before the use of plant materials, no matter new planting, replanting or replacement shall be checked and approved by Party A, the unqualified person should be transported at any time and shall not be detained at the scene. If any of the following circumstances are not allowed, the use shall not be used: d5F (1) those who do not conform to the specifications. $oy~} (2) there are significant pests, dry, cracked, dry branches. Harm, injury, aging, aging, breaking the injured bark. 31B (3) the tree type is not correct, too dry too sparse, crown bending, deflection and abnormal B (4) after digging aside too long, dry root, buds withered or falling. \06+ (5) cut type plant