轧钢自动化论文（Steel rolling automation）.doc

轧钢自动化论文（Steel rolling automation） DOC documents may experience poor browsing on the WAP side. It is recommended that you first select TXT, or download the source file to the local view. Position automatic control (position automatic control (APC)) Abstract In automatic control technology, presetting position automatic control is one of the main control methods. In the rolling process of APC has a very important position, such as furnace billet location, pusher stroke control, tapping machine, vertical stroke control stick opening set, side guide opening pressure setting, position setting, roll speed setting, record setting, opening width of pinch roll gap setting and help roll gap setting is finished by APC system. This paper introduces the key technology principle and development of APC rolling automation, and the application of APC in steel plate shearing, four roll leveling machine and plate mill press down device. Keywords: automatic position control, rolling, APC, application One Automatic Place Control (APC) () Abstract In automatic control technology, automatic control of pre-set position control mode is the main one. APC set in the rolling process has a very important position, such as blast furnace steel billet positioning, pusher stroke control, schedule control tapping machine, vertical stick mouth opening set, the side guide plate opening degree setting, pressure setting position set. Roller speed setting, the width of the opening set in mind, pinch roll roll roll roll gap setting and help set the roll gap by the APC system to complete such. This article describes the key technical principles APC rolling automation, development and, APC in the steel plate, four-roll mill, plate mill reduction in the application of the device. Keywords:, automatic, place, control, Rolling, APC, Applications Two Catalog Abstract...... 1 Abstract...... 2 Chapter 1 introduction...... 41.1 development of rolling process automation...... 4, second chapters, APC concepts and pr