饲料粉碎机的分类（Classification of feed mills）.docVIP

饲料粉碎机的分类（Classification of feed mills） Double rotor grinder can grind various organic granular feed, such as corn, sorghum, wheat and crushed bread; food pepper grinding; chemical industry of wood powder grinding and non oil material granularity is smaller. This series of crusher in inheriting the traditional advantage of mill (steel plate welded structure, motor and rotor installation with elastic pin coupling direct drive and top feed on the same base, using the latest theory of grinding) modern design made of double rotor and double tangent velocity impact, instant crush material to avoid the single rotor grinder to produce circulation and hole blocking during the fine pulverization process problems than single rotor grinder with power production increased by more than 30% advantages compared with traditional mill incomparable. Feed grinder according to different standards, you can have the following classification methods: According to the size of crushing material, it can be divided into ordinary pulverizer, micro crusher and superfine crusher; According to the structure of the crusher, it can be divided into pin type, hammer type, hammer hammer type, opposite roller type and claw type. Various types of grinding machine structure principle, the following for you to elaborate: 1 、 ordinary hammer crusher is the most widely used in feed industry. It is not supported by the principle of crushing impact, in the process of crushing, impact hammer and material for the vast majority of eccentric impact, so that the material in the grinding chamber is rotated, will consume part of energy, which is one of the important reasons for the high energy consumption of hammer mill. At the same time, the material of the hammer mill is affected by the impact of the high speed hammer. Under dynamic loads will be close to the screen surface to form a circular motion, produce circulation layer, large particles of the material in the outer layer, small particles of the material in th