OSIRIS v4.1虹膜识别开源代码使用文档.pdfVIP

A biometric reference system for iris OSIRIS version 4.1 Foreword. This version of OSIRIS_v4.1 was developed by Telecom Sud Paris (previously GET-INT) by Guillaume Sutra, Bernadette Dorizzi and Sonia Garcia-Salicetti. This documentation was written by Nadia Othman. Abstract. The OSIRIS (Open Source for IRIS) reference system is an open source iris recognition system developed in the framework of the BioSecure project [1]. The system is inspired by Daugman works [2]. It is composed of four processing modules (segmentation, normalisation, encoding and matching), which correspond to the four steps of the complete iris recognition procedure. In version v4.1, the segmentation part uses a Viterbi algorithm to find the boundaries of the iris and of the pupil [3]. The normalisation step is based on Daugmans rubber-sheet model and it uses the coarse contours detected by the Viterbi. Note that there is no assumption of circularity of the normalized iris and pupil contours. The encoding and matching parts are based respectively on Gabor phase demodulation and Hamming distance classification. Introduction: This document describes the version 4.1 of the OSIRIS reference system and explains how to use it in practice to build an automatic verification experiment based on iris modality. This document is divided into fives parts. In the first part, we present how to install the system. Then, in the second part, the database used and the protocol assiciated are described. In the third part, the role of each module and how to use it are explained. In the fourth part, the algorithms of each module are detailed and finally, the experimental results obtained in the verification are shown in the last part. This document refers to version 4.1 of th