RFID标签天线HFSS建模与仿真.pdf

本科生毕业设计（论文）正文 （2012 届始执行） 本科生毕业设计（论文）正文 RFID 无源标签天线研究与设计 摘 要 在 21 世纪，信息及无线电技术快速发展，人们对自动控制、监控、追踪以及数据分析提出了更高 的需求。射频识别技术是一种不需要互相接触的自动识别技术，它通过高频无线电信号自动识别目 标物体并获取相关所需要的数据。射频识别技术因具有诸多优良特性而被广泛运用于很多领域。近几 年来，射频识别理论及其天线的设计方法有了很大的发展。 本文概述了射频识别系统的组成及其天线的基本工作原理，在分析标签天线主要参数的基础上 ， 设计了谐振频率在 915 兆赫兹的附着在基板上的半波对称偶极子以及折叠偶极子天线。本文利用 Ansoft 公司的高频结构仿真软件HFSS，进行建模、仿真和优化并记录了标签天线的基本设计过程。 本文所设计的标签天线，经过仿真、优化后的参数满足任务书要求。 关键词 RFID 系统， 标签天线，UHF ，HFSS 软件 ： 本科生毕业设计（论文）正文 STUDY AND DESIGN OF THE RFID TAG ANTENNA ABSTRACT In the 21st century, with the rapid development of information and radio technology, it has in high demands of automatic control,monitoring . Tracking and data analysis. RFID technology is an automatic identification technology that does not require contact with each other through the high-frequency radio signal, it automatically identify the target object and the need to obtain the relevant data. RFID technology has many excellent features and is widely used in many fields In recent years, the theory of radio frequency identification and its antenna design method has been greatly developed This article outlines the basic working principle of the composition and the antenna of the radio frequency identification system. On the basis of the analysis of the main parameters , a half-wave symmetry dipole and a folded dipole antenna working at the resonant frequencies of 915 MHz are designed on the FR4 substrates In this paper, the high-frequency structure simulation software HFSS is used for modeling, simulation and optimization in the tag antenna design . Simulation results show that the Tag antenna design meet