包衣处方和工艺对对乙酰氨基酚缓释微丸释放度的影响.PDFVIP

包衣处方和工艺对对乙酰氨基酚缓释微丸释放度的影响 王嘉伟，王洪光，杜昌余(青岛科技大学药学系，山东 青岛 266042) 摘要：目的 研究包衣处方和工艺对离心法制备的膜控型缓释微丸的体外释药行为的影响。方法 以对乙酰氨基酚为模 型药，采用 BZJ-360 型离心造粒包衣机以液相层积法制备含药丸芯，以微丸的体外释放度为考察指标，分别用单因素考 察和正交试验的方法来探讨包衣处方、工艺因素对缓释微丸的释药特征的影响，并筛选出最佳水平，通过对药物释放度 曲线的药动学模型拟合确定微丸的缓释机制。结果 以丙烯酸树脂(Eudragit RS PO ∶RL PO=10 ∶1)为包衣材料，包衣增 重为 10%，聚合物浓度为6%时包衣微丸在pH 6.2 的磷酸盐缓冲液中呈现良好的缓释效果，释药机制主要是以膜控为主 的扩散作用，骨架溶蚀也起到了一定的协同作用。结论 该技术制备的对乙酰氨基酚缓释微丸包衣均匀，操作简便，质 量可靠，可工业化生产。 关键词：离心法；膜控缓释微丸；丙烯酸树脂；对乙酰氨基酚 中图分类号：R943 文献标志码：B 文章编号：1007-7693(2013)01-0055-05 Influence of Coating Formulation and Preparation of Acetaminophen Sustained-release Pellets on the Drug Release WANG Jiawei, WANG Hongguang, DU Changyu(Department of Pharmacy, Qingdao University of Science and Technology, Qingdao 266042, China) ABSTRACT: OBJECTIVE To study the influence of coating formulation and preparation of membrane controlled release pellets on its release profile in vitro . METHODS Acetaminophen pellets were prepared by means of liquid layering with the centrifugal granulation equipment. The single factor experiments and orthogonal design were applied to optimize the formulation of coating solution and the technical parameter. The release mechanism of coated pellets was studied by fitting with different release models. RESULTS The optimal drug sustained-release was showed at the ratio of Eudragit RS PO to RL PO of 10 ∶1, loading weight of copolymers of 10% and polymer concentration of 6%. The drug release from coated pellets was primarily promoted by osmotic pressure and skeleton dissolution also played a certain synergy. CONCLUSION The acetaminophen membrane controlled release pellets prepared by centrifugal granulation equipment are uniformly coated, easy to be operated, which has reliable quality, and can be a industrial production. KEY WORDS: centrifugal