焊接类别及零点校正（Welding type and zero correction）.docVIP

焊接类别及零点校正（Welding type and zero correction） tig 钨极氩弧焊, me 熔化极惰性气体保护焊, gastrointestinal 熔化极活性气体保护焊, smaw焊条手工电弧焊 mig焊 (熔化极气体保护电弧焊) 这种焊接方法是利用连续送进的焊丝与工件之间燃烧的电弧作热源, 由焊炬嘴喷出的气体来保护电弧进行焊接的.熔化极气体保护电弧焊通常用的保护气体有氩气, 氦气, 二氧化碳气或这些的混合气体.以氩气或氦气为保护气时称为熔化极惰性气体保护电弧焊 (在国际上称为mig焊). 熔化极气体保护电弧焊的主要优点是可以方便的进行各种位置的焊接, 同时也具有焊接速度较快, 熔敷率较高的优点.熔化极活性气体保护电弧焊可适用于大部分主要金属的焊接, 包括碳钢, 合金钢.熔化极惰性气体保护电弧焊适用于不锈钢, 铝, 镁, 铜, 钛, 镐及镍合金.利用这种焊接方法还可以进行电弧点焊. tig tungsten inert gas, 缩写tig. 直译就是钨极惰性气体焊. 钨极氩弧焊按操作方式分为手工焊、半自动焊和自动焊三类.手工钨极氩弧焊时, 焊枪的运动和添加填充焊丝完全靠手工操作; 半自动钨极氩弧焊时, 焊枪运动靠手工操作, 但填充焊丝则由送丝机构自动送进; 自动钨极氩弧焊时, 如工件固定电弧运动, 则焊枪安装在焊接小车上, The walking and filling wire of the trolley can be added by cold wire or hot wire. Hot wire means to increase the rate of deposition. In some cases, such as sheet welding or backing welding, there is sometimes no need to add filler wire. TIG is today the main welding method in welding, characterized by good quality, ability and welding of thin plates, because there is no use of flux can reduce the slag, so can improve the welding quality, the welding quality for TIG has been cited in aerospace industry. MAG (metal active-gas welding) is a metal active gas welding, metal active gas welding is a welding process, the protective gas commonly used are: gas mixture of argon and helium gas, these gases or CO2. The main advantage of MAG is that it is convenient to carry out welding in various positions. It also has the advantages of fast welding speed and high deposition rate. GMAW with argon or helium for the protection of gas called metal inert gas arc welding (in the international community referred to as MIG welding); inert gas and oxidizing gases (O2, CO2) gas mixture for the protection of gas, or CO2 gas or gas mixture for the protection of CO2 + O2 gas, collectively referred to as the metal active gas arc welding (in the international community referred to as MAG welding). MIG arc welding can be applied to most major metals, including carbon steel and alloy steel. MIG welding is suitable for s