特种设备习题（Special equipment exercises）.docVIP

特种设备习题（Special equipment exercises） Individual choice question 1. rated evaporation shall be at least two separate water level gauges for boilers larger than (B) t/h. P137 A.0.1 B.0.2 C.0.5 D.1.0 2. pressure gauge on boiler pressure vessel, dial diameter shall not be less than (C) mm. P137 A.150 B.120 C.100 D.50 4. test field (plant) to support the ground should be formed in special vehicles. Solid, should not be in a ditch. The shelter and other underground buildings above test, the ramp slope is less than (C)%P173 A.3 B.5 C.10 D.15 5. when the temperature of the pressure vessel shell wall or component metal is lower than (B) DEG C, the design temperature shall be determined at the lowest temperature. P113 A.-30 B.-20 C.-10 D.0 6. pressure vessel commonly used pressure gauge is (A) pressure gauge. P139 A. elastic element B. liquid column C. piston D. power 7. crane on any height of not less than (C) m points should be protected. P161 A.1 B.1.5 C.2 D.2.5 8. when the elevator is in the car or towards the bottom of the squat, the device that absorbs the car and the counterweight is called D. A. safety tongs B. speed limiter C. limit switch D. buffer 9. does not contact with the workpiece when detecting, not only can detect the flaw, but also can reveal the dimensional change and the material characteristic examination method is (D). P153 A. magnetic memory testing B. magnetic particle inspection C. penetrant inspection D. eddy current testing 10., according to Chinas current functional division, into the quality and technical supervision department safety supervision range lifting machinery, including rated lifting weight is greater than or equal to 1t. and lifting height is greater than or equal to (B) m crane. P111 A.1 B.2 C.3 D.4 11. the minimum distance between cranes and other equipment or fixed structures shall be maintained above (A) M. P160 A.0.5 B.1.0 C.1.5 D.2.0 12. safety devices for boiler and pressure vessels can be classified according to their performan