高频多导体串扰的简化三维全波算法及其有效性评价-电工技术学报.pdfVIP

20 12 年 9 月 电 工 技 术 学 报 Vol.27 No. 9 第 27 卷第 9 期 TRAN SACTION S OF CHINA ELECTROTECHNICAL SOCIETY Sep . 20 12 高频多导体串扰的简化三维全波算法及其有效 性评估 张刚 王立欣 刘超 （哈尔滨工业大学电气工程及自动化学院 哈尔滨 15000 1） 摘要 为了克服多导体传输线方法求解多导体串扰时高频响应准 度不足的问题，研究了 一种基于导体等效的简化算法。根据导体端接阻抗的不同将多导体传输线分组并分别等效为一 根导体，这种等效节省了计算资源，使得用三维全波的方法求解多导体串扰响应成为可能。应 用特征选择验证法，定量 估了简化算法的有效性。通过对仿真结果的 估表明，简化算法比 多导体传输线方法在准 性上提高一个等级。 关键词：串扰 多导体传输线理论 简化算法 特征选择验证 中 分类号：TM 15 A Multiconductor Reduction 3D Full-Wave Method for High Frequency Crosstalk Problem and Its Validation Zhang Gang Wang L ix in L iu Chao （Harbin Institute of Technology Harbin 15000 1 China ） Abstract A reduced mutliconductor equivalent method is studied to overcome the limitation of the traditional multiconductor transmission line(MTL) method. It can predict the crosstalk accurately in high frequency . The principle of this method is that all conductors in a multi-core cable are classified as four groups according to the terminal loads. Each group can be equivalent to one conductor which means less obj ects have to be considered and less computing resource are needed. Thus the 3D full-wave method can be applied to multi-conductor crosstalk problem . Then the feature selective validation (FSV) method is introduced to quantitatively validate the efficiency of this simplified method. The validation results demonstrate that the reduced algorithm improves the level of accuracy up to “Good” compared with “Poor” for the traditional MTL theory . Keywords ：Crosstalk, MTL theory, reduced algorithm, FSV method 线方法 （Multiconductor Transmission Line ，MTL ） 1 引言