多路无线超声波测距系统研发-中国测试.pdf

第41卷第1期 中国测试 Vol.41 No.1 2015年 1月 CHINA MEASUREMENT TEST January，2015 doi院10.11857/j.issn.1674-5124.2015.01.021 多路无线超声波测距系统研发 1袁2 1 1 杜 洁 袁 徐本连 袁 朱培逸 ， ， （1.常熟理工学院电气与自动化工程学院 江苏 常熟 215500；2.中国矿业大学信息与电气工程学院 江苏 徐州 221000） 摘 要院结合多路超声波传感器与无线通信模块设计一种新型超声波测距系统，采用两片单片机通过SPI接口与无 线收发模块进行数据传输，并用温度传感器DS18B20进行温度补偿以提高测距精度，具有液晶显示和远距离上位机监 测等功能。实测误差在6%内，达到厘米级的测量准确度，满足一些生活及工业中的应用需求。 关键词院超声波测距；多路；无线收发模块；温度补偿 文献标志码院A 文章编号院1674-5124渊2015冤01-0081-04 Design of wireless ultrasonic ranging system with temperature compensation 1，2 1 1 DU Jie ，XU Benlian ，ZHU Peiyi （1.Department of Electrical and Automation Engineering，Changshu Institute of Technology， Changshu 215500，China； 2.Department of Information and Electrical Engineering，China University of Mining，Xuzhou 221000，China） Abstract: In the field of measurement，the distance has always been the important parameter that needs to be measured. How to achieve new measurement was the issue that people continue to explore and study. Combined multi-path ultrasonic sensors with wireless communication module，a new ultrasonic ranging system was designed，which used two microcontrollers to transmit data with the wireless transceiver module via SPI interface and used the temperature sensor DS18B20 for temperature compensation，so it can improve ranging accuracy. The system had a liquid crystal display and remote PC monitoring functions. The experimental tests show that the error is within six perce