- 1、本文档共21页,可阅读全部内容。
- 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
- 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载。
- 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
平板计数法-计数原则
STANDARD PLATE COUNT, COLIFORM, AND SIMPLIFIED COUNT METHODS
[Unless otherwise stated all tolerances are ±5%]
SAMPLES
1. Laboratory sample requirements (see CP item 33 34) ________
STANDARD PLATE AND COLIFORM METHODS
DILUTING SAMPLES
2. Work Area ________
a. Level plating bench not in direct sunlight ________
b. Sanitized immediately before start of plating ________
3. Selecting Dilutions ________
a. Standard Plate Count ________
1. Plate two decimal dilutions per sample ________
2. Select dilutions to yield one plate with
25-250 colonies ________
a. Raw milk is normally diluted to 1:100 and
1:1000 ________
b. Finished products are normally diluted to
1:10 and 1:100 ________
c. The above are general guidelines and may have
to be adjusted on a case by case basis
(dilutions below 1:10 not required) ________
b. Coliform Counts ________
1. For milk samples, 1 mL direct and/or decimal
dilutions ________
2. For all other products, distribute 10 mL of a
1:10 dilution among three plates, generally high
fat and viscous products ________
4. Identifying Plates
文档评论(0)