加工中心几何精度检验标准的研究（Research on geometric precision inspection standard of machining center）.docVIP

下载本文档

4
0
约8.9千字
约 6页
2017-09-26 发布于河南
举报
版权申诉

加工中心几何精度检验标准的研究（Research on geometric precision inspection standard of machining center）.doc

1、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。。
2、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击这里二次下载。
3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。
4、该文档为VIP文档，如果想要下载，成为VIP会员后，下载免费。
5、成为VIP后，下载本文档将扣除1次下载权益。下载后，不支持退款、换文档。如有疑问请联系我们。
6、成为VIP后，您将拥有八大权益，权益包括：VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
7、VIP文档为合作方或网友上传，每下载1次，网站将根据用户上传文档的质量评分、类型等，对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档

加工中心几何精度检验标准的研究（Research on geometric precision inspection standard of machining center）

加工中心几何精度检验标准的研究（Research on geometric precision inspection standard of machining center） No entry inspection and RAM (the main structure) along the axis of movement of the straightness error. Parallel and vertical test of motion In the JB/GQ1140-89 standard, the inspection of the parallel movement, just check the spindle axis parallelism and X axis on the Z axis movement of the table T slot or edge parallel degree, and seriously affect the machining precision of the spindle and slide along the axis of motion of the Z axis parallel degree and X axis or Z axis motion of the working table is not out of the parallel degree of inspection. The verticality of the vertical axis is checked only for the inspection of the verticality of the movement. The verticality of the X axis motion of the Y axis and the vertical motion of the Z axis are not checked. Therefore, it is obviously unreasonable and unscientific to reflect the geometrical accuracy of the machine tools without checking the positions of each other in a fuzzy state. G11 seized the static axis and the work table parallelism (horizontal) or vertical (vertical), practical significance, and the static G19 table T groove straightness detection, can be canceled, because this is part of the inspection work station. ISO/DIS10791 international standard geometric accuracy test section Motion straightness test In the ISO/DIS10791 standard, the detection of X, Y and Z three axis motion straightness error, all is according to the method to detect two line displacement error and three angular displacement error, fully meet the reasonable test method the straightness. It should be emphasized that the Y axis straightness in inclined around the Y axis component of the test, because the level instrument can not be placed, can not be used; and the autocollimator mirror on the headstock, and can not guarantee the synchronous autocollimator with mirror translational accuracy, also should not be used. Therefore, as shown in Figure 4, it