建筑力学（Building mechanics）.docVIP

建筑力学（Building mechanics） Third element concrete Fill in the blanks 1. concrete workability including _________, ________ and _________ three aspects of meaning. 2. methods of determination of concrete workability is ________ method or ________ method. 3. with anhydrite or industrial fluorine gypsum as cement retarder, abnormal condensation will when using ______ jianshuiji. The basic materials of cement concrete with 4. _________, _________, ________ and _________. 5. concrete mix design is to meet the basic requirements of _________, _________, ________ and _________. 6. concrete three parameter design is _________, ________ and _________. 7. concrete were classified according to their intensity, including _________ concrete, concrete and concrete _________ ________. 8. concrete aggregates often include several moisture state _________ state, _________ state, ________ state and _________ moist. Answer： 1. liquidity, cohesiveness, water retention 2. slump Vebe consistometer 3. calcium lignosulfonate 4. cement, water, sand, stone 5., workability, strength, durability, economy 6., water to ash ratio, sand rate, unit water consumption 7. low strength, medium strength and high strength 8. dry air, dry, saturated surface, dry and moist Two, multiple-choice questions (individual choice) 1. proportion design of concrete, water cement ratio value is based on the concrete requirements to determine the _________. A, strength and durability, B, strength, C, durability, D, workability and strength 2. _________ concrete strength. A, tensile B, compressive C, bending D, shear resistance The 3. main measures to prevent the corrosion of steel in concrete is _________. A, improve the density of concrete, B, steel surface brushing C and steel surface are treated with alkali, and rust inhibitor is added to D and concrete 4. selection of concrete aggregate, should make it _________. A, the total surface area is large, the porosity is large, B, total surface area is small, and the poros