网线水晶头排序（Network crystal head sorting）.docVIP

网线水晶头排序（Network crystal head sorting） Wire mesh crystal head method Network crystal head has two practice standards, standards are TIA/EIA, 568B and TIA/EIA 568A. The production of crystal crystal head first head card side down, a copper side, with an opening party towards his body, from left to right order TIA/EIA 568B and TIA/EIA 568Av is below the wire order (select 568B cable connection): TIA/EIA-568B:1, white, orange, orange 2 3, white, green, blue, white, 4, 5, 6, 7 blue, green, white, brown, brown, white and green, 8 TIA/EIA-568A:1, 2, 3 green, white, orange, blue, 4, 5, 6, orange, white and blue, 7 white, brown, brown, 8 In the whole network wiring, a wiring mode is used, but both ends have RJ-45 plug network connection line, whether it is the terminal connection mode A or the terminal connection mode B, and all of them are universal in the network. The order of the twisted pair is one-to-one corresponding to the pin number of the RJ45 header. 10M Ethernet network connection using 1, 2, 3, 6 number of core lines to pass data, 100M Ethernet network using 4, 5, 7, 8 number of core lines to pass data. Why are now 4 pairs (8 core) twisted pair? This is mainly in order to adapt to more scope of use, without changing the premise of the infrastructure, it can meet all kinds of user equipment network wiring requirements. For example, we can use one pair of twisted wires to achieve voice communication at the same time. 100BASE-T4 RJ-45 pairs of twisted pair cable connection method is as follows: 1, 2 for sending, 3, 6 for receiving, 4, 5, 7, 8 is two-way line. 1, 2 lines must be twisted, 3, 4, 6 twisted pair, 5 pair, 7, 8 twisted pair. According to the ends of the network crystal head practices are the same, there are two kinds of cable connection. Through the line: both ends of the network crystal head, the same practice, are TIA/EIA-568B standards, or are TIA/EIA-568A standards. For: PC card to HUB ordinary mouth, HUB ordinary mouth to HUB cascade. Straig