4座微型客货两用车变速器传动轴和操纵机构设计说明书【毕业论文+CAD图纸全套】.doc

四座微型客货两用车—变速器、传动轴和操纵机构设计 摘 要 变速器、传动轴和操纵机构是汽车动力重要组成部分，本设计是建立在参考国内外大量微型客货两用车动力设计的基础之上，在设计中注重实际运用并密切联系小组成员的整车总体布置、离合器、驱动桥、车架、制动系的设计。实现变速器与发动机及其他机构的最佳匹配，力求整车结构及性能更为合理。 变速器主要用来改变发动机传到驱动轮上的转矩和转速，目的是在起步、爬坡、转弯、加速等各种行驶工况下，使汽车获得不同的牵引力和速度，同时使发动机在最有利的工况下范围工作，本设计设有四个前进档、空档和倒档。变速器的结构直接影响汽车的动力性，经济性，操纵可靠性。 设计主要分为三个部分。在变速器设计上先进行其结构分析，在参数方面考虑档数，传动比，及其如何分配传动比。在变速器齿轮设计中，主要考虑材料、强度和齿数的确定；传动轴方面，通过对传动轴的传动类型与结构分析，对传动轴的临界转速和计算载荷的确定，分析出传动轴的花键轴和轴管的尺寸，并校核了其扭转强度和临界转速，确定出合适的安全系数；操作机构方面，考虑到微型客货两用车的使用条件和要求，为了协调驾驶室、总体布置等问题，本次设计采用双拉杆式远距离换档操纵机构和单杆式高低档换档操纵机构。 关键词：变速器，传动轴，操纵机构，微型客货两用车 four seats MINI-station waggon TRANSMISSION PROPELLER SHAFT AND OPERATED MECHANISM ABSTRACT The structure of the transmission ，powerller shaft and operated mechanism are the most important parts of the vehicle. The design is referrenced many of the power about minitype station waggons in domestic and oversea. During design times, I attented the fact using in lives and interosculate my co-worker’s design, it included collectivity disposal, clutch , main frame,drive axle ,brake system. Gearbox can be well worked with engine and other machines. It wanted to be that the performance of the whole vehicle reasonable. The transmission is main used for changing engine’s power which transmited to the torque and revolution on the drive wheel.When the vehicle under the case about starting, mountain climbing, swerving,adding speed that the transmission can give different power or speed to the vehicle. At the same time,the engine can work in good conditions.The design involved four D-drive,one R-reverse and one N-neutral. The structure of the transmission can influence the vehicle’s power, economic, controling. The design involved three parts in all,first, I analyse its structure,In parameter the main thinking is about the number of shaft,gear ratios and how to assign them. In gear design the main problem is materials ,intension and NO. of wheel; In transmission shaft,through analysing the varieties and structur