葫芦丝的制作（The production of cucurbit silk）.docVIP

葫芦丝的制作（The production of cucurbit silk） Process for making cucurbit silk Summary Cucurbit silk is a wonderful flower in the Chinese national garden. She has a clear, bright, soft and floating shape, and has typical and strong features of the southwest minority. The structure of cucurbit silk is very simple (Figure 1), but the pronunciation principle is elusive. Her vocal range is narrow and expressive. Although the number of people who love cucurbit is countless, the people who make her, especially those who are highly skilled, are very few. This is: the simpler instruments, the more difficult to draw quality. A lot of cucurbit lovers want to make their own gourds, but they cant start without any data. I have made a little of my experience in making it. I hope it will help the novice producer. Figure 1 Chapter 1 reed production Section 1 materials selection Reed is the most critical part of cucurbit, and it is also the most difficult to master. Production of cucurbit reed materials of copper, beryllium or Tin Phosphorus Bronze usually used. After comparing experiments, we should optimize the tin bronze by considering the sound quality, sound quality, sound volume and life expectancy. Copper skin thickness is generally 0.1 mm, but it is best to use 0.2 mm copper skin, after forging, so as to reach 0.1 mm better. Because forging has two advantages: first, it can increase the density of the copper skin and increase the elasticity, thus increasing the life of the reed. Second, due to the copper in the production process of rolling, it is bound to form a texture. Forging can eliminate or reduce the texture, thereby improving the quality of sound. Second pieces of cutting material The actual size of the reed is 25 mm long and 10 mm wide. Since the copper skin will have an extension in the forging process, the material should be taken into consideration when cutting. 0.2 mm copper skin, just cut out 7 mm wide, the length is generally 80~100 mm on it. Note that you must see