铁路（Railway）.docVIP

铁路（Railway） I. individual choice questions 1. the length of ordinary sleepers in our country is (). (A) 2.0m (B), 2.2m (C), 2.5m (D), 2.6m The 2. is the gauge rail head tread (under) the minimum distance between the range of two side rails. (A) (B) 14 mm, 15 mm and 16 mm (C) (D) 18 mm 3. Chinas railway mainly adopts () standard gauge. (A) 1430mm (B), 1432mm (C), 1435mm (D), 1445mm 4. rail head total wear = vertical wear + () side wear. (A) 1 (B), 1/2 (C), 1/3 (D), 1/4 5. the width of the pavement shall be the same as the width of the road, and the minimum shall not be less than (). (A) 5m (B), 3M (C), 2.5m (D), 2m 6. crossing the road and railway should be orthogonal, have difficulty when the angle should be larger than the (general). (A) 30 degrees (B), 40 degrees (C), 45 degrees (D), 60 degrees 7. formulas in common rail head seam line standard size In a0= alpha L (tz-t0) + AG, TZ is found in terms of Tmax and Tmin, and Tmax and Tmin are local (). (A) historical maximum and minimum temperatures (B), annual maximum and minimum temperatures; (C) annual maximum and minimum rail temperature (D) annual maximum and minimum rail temperature; 8. the damage length of the concrete pillow shoulder is the length of the shoulder block. (A) 1/3 above (B) 1/2 above (C) 1/4~1/3 (D) 1/3~1/2 In the 9.25m rail section, the rail temperature limit is changed when the rail is replaced or the rail is adjusted. (A) (tz-20 DEG C) ~ (tz+20 DEG C) (B) (tz-25 DEG C) ~ (tz+25 DEG C) (C) (tz-30 DEG C) ~ (tz+30 DEG C) (D) (tz-35 DEG C) ~ (tz+35 DEG C) 10. under any condition, the concrete pillow is laid at most per kilometre (). (A) 1600 roots (B), 1760 roots (C), 1840 roots (D), 1920 roots 11. when the concrete joint is longitudinally split and the width of the corner of the shoulder is greater than (), it is invalid. (A) 0.8mm (B), 1.0mm (C) 1.2, mm (D) 1.5, mm 12. insulation joint rail joint shall not be less than (). (A) 18mm (B), 6mm (C), 5mm (D), 15mm 13. China Railway stipulates that the